Navstax ADF issue

Post Reply
181henry
Posts: 3
Joined: Fri May 18, 2018 2:30 pm

Navstax ADF issue

Post by 181henry » Fri May 18, 2018 2:34 pm

Currently I am using ? C310R latest release with navstax radio set
The ADF is not working, with the right frequency the bearing needle will
not move

Default ? C310 ADF unit/bearing needle works no problems

Thanks

Navstax
Site Admin
Posts: 38
Joined: Fri Jan 26, 2018 2:58 am

Re: Navstax ADF issue

Post by Navstax » Sat May 19, 2018 9:35 am

We need to determine whether this is caused by the 310 or the KN. Can you please check your KingNav with your default aircraft and report back here with the results?

Thank you

181henry
Posts: 3
Joined: Fri May 18, 2018 2:30 pm

Re: Navstax ADF issue

Post by 181henry » Mon May 21, 2018 6:45 am

Thank you for reply!
I tested with default b58, Navstax panel ADF works perfectly
I have also tested the ? 310 default panel again, the ADF works normally, but once I chose NavStaX panel it fails
So it must be a compatibility issue?
Do you as a developer have access to ? 310 redux? Can you recreate the error
Best regards :)

Navstax
Site Admin
Posts: 38
Joined: Fri Jan 26, 2018 2:58 am

Re: Navstax ADF issue

Post by Navstax » Mon May 21, 2018 10:32 am

We have tested and can replicate your issue. We believe there is something going on in the 310 redux. Have you talked to ?? If so, what did they say?

We will also contact them.

181henry
Posts: 3
Joined: Fri May 18, 2018 2:30 pm

Re: Navstax ADF issue

Post by 181henry » Tue May 22, 2018 7:51 am

Thank you for your help again
I am still waiting for ? to approve me to register on their forum
Please keep me updated if you hear anything from them
Best Regards

navstaxdev
Posts: 42
Joined: Sun Feb 04, 2018 11:53 pm

Re: Navstax ADF issue

Post by navstaxdev » Thu May 24, 2018 11:25 am

I got contacted and they told us will make fix in C310 Redux for KingNav.

Post Reply